EZ-BRICKs are ultra-thin cement-based composite panels featuring proprietary
marble/cement chip technology for a realistic 3D brick texture. They deliver the
look of traditional masonry in a lightweight, flexible format.

Each sheet measures approximately 45.7" × 35.4" and covers 11.24 sq. ft.
Each box contains 10 sheets, covering 112.4 sq. ft. total.

Yes. EZ-BRICKs are designed for both interior and exterior use. They are
weather-resistant, moisture-permeable, and perform in temperatures ranging
from -58°F to 158°F once installed.

EZ-Bricks bond to:

• Concrete
• Cement board
• Drywall
• Block
• Aerated concrete
• Cement-sand plaster
• OSB (with proper preparation)
• Foam substrates (with prep guidelines)

Proper surface preparation is required to ensure adhesion and performance.

We recommend a polymer-modified white tile adhesive, such as Laticrete 254
Platinum Plus (White).
Using a 1⁄4" × 3⁄8" notched trowel, one 25 lb bag covers approximately 70–85 sq. ft.

No. EZ-BRICKs are DIY-friendly. Over 65% of customers install them without
hiring a contractor. No mortar, grout, or specialized masonry tools are required.

Installation speed depends on project size, but the system is significantly
faster than traditional brick veneer because there is:
● No mortar
● No curing between courses
● No structural reinforcement required
Protective film should be removed no earlier than 4 days after installation to
ensure proper curing.

Compared to traditional stucco or vinyl:
● Lower total installed cost
● Greater texture depth and realism
● Higher moisture resistance
● Excellent fire resistance (cement-based)
● Reduced cracking and warping risks

Yes. Because they are cement-based, EZ-BRICKs offer strong fire resistance
and outperform vinyl or plastic siding systems.

EZ-BRICKs require minimal maintenance. Unlike stucco, they do not require
periodic repainting and are resistant to cracking and moisture intrusion when
installed properly.